HP Surestore 64 - Director Switch User Manual page 244

Variable Provides:
ModuleIndex Module index.
FxPortIndex Port index.
AdminStatus Desired state of the F_Port. The testing (3) state indicates no operational
frames can be passed. When a fabric element initializes, all F_Ports start with
fcFPortPhysAdminStatus in the offline (2) state. As the result of either explicit
management action or per-configuration information accessible by the fabric
element, fcFPortPhysAdminStatus is then changed to either the online (1) or
testing (3) states or remains in the offline (2) state.
OperStatus Operational status of the F_Port. The testing (3) state indicates no operational
frames can be passed. If fcFPortPhysAdminStatus is offline (2), then
fcFPortPhysOperStatus should be offline (2). If fcFPortPhysAdminStatus is
changed to online (1) then fcFPortPhysOperStatus should change to online (1).
If the F_Port is ready to accept a fabric login request from the attached N_Port,
it should proceed and remain in the link-failure (4) state if, and only if, there is a
fault that prevents it from going to the online (1) state.
LastChange Value of sysUpTime at the time the F_Port entered its operational status. A
value of zero indicates the F Port's operational status has not changed since
the agent last started.
R_T_TOV Receiver_Transmitter Timeout value of the F_Port used by the receiver logic to
detect loss of synchronization.
Variable Provides:
fcFxlogiModuleIndex Module index.
228