Configuring The Hp Storeonce Backup System For Nas (Nfs) - HP StoreOnce B6000 Configuration Manual

estape
3. To create device files for the target devices, type the following:
# insf
4. To display the device files associated with the operational target devices, type:
# ioscan
Class I
==========================================================================
ba 4
fc 5
PCI/PCI-X Fibre Channel Adapter (FC Port 1)
/dev/fcd5
fcp 11 0/5/1/0.166 fcd_fcp CLAIMED
ext_bus 33 0/5/1/0.166.0.255.0 fcd_vbus CLAIMED INTERFACE FCP Device Interface
target
autoch 1
/dev/rac/c33t1d0
target
tape 23 0/5/1/0.166.0.255.0.2.0 stape CLAIMED DEVICE HP
/dev/rmt/1m
/dev/rmt/1mb
In this example the tape drives device files are:
/dev/rmt/1m
/dev/rmt/1mb
/dev/rmt/1mn
/dev/rmt/1mnb
/dev/rmt/c33t2d0BEST
/dev/rmt/c33t2d0BESTb
/dev/rmt/c33t2d0BESTn
/dev/rmt/c33t2d0BESTnb
And the autochanger device file is:
/dev/rac/c33t1d0

Configuring the HP StoreOnce Backup System for NAS (NFS)

The StoreOnce Backup System NAS interface should be configured to use NFS as the Access
Protocol when backing up data using HP-UX.
The NFS share can then be mounted in HP-UX using the mount command. For example:
# mount 192.168.0.100:/nas/D2DBackupShare /mnt/D2DBackupShare
The StoreOnce Backup System supports NFSv3. To explicitly mount the StoreOnce Backup System
using NFSv3, the following syntax should be used:
# mount t nfs
(now) static
(next boot) static
fn
H/W Path Driver S/W State
0/5 lba CLAIMED
0/5/1/0 fcd CLAIMED
8 0/5/1/0.166.0.255.0.1
0/5/1/0.166.0.255.0.1.0 schgr CLAIMED DEVICE HP
9 0/5/1/0.166.0.255.0.2
/dev/rmt/1mn
/dev/rmt/1mnb
o nfsvers=3 x.x.x.x:/<name of share> <local mount>
best
explicit
H/W Type Description
BUS_NEXUS Local PCI-X Bus Adapter (783)
INTERFACE HP AB379-60001 4Gb Dual Port
INTERFACE FCP Domain
tgt CLAIMED
tgt CLAIMED
/dev/rmt/c33t2d0BEST
/dev/rmt/c33t2d0BESTb
AT&T, best density available
Berkeley, best density available
AT&T, no rewind, best density available
Berkeley, no rewind, best density available
AT&T, best density available
Berkeley, best density available
AT&T, best density available
Berkeley, no rewind, best density available
Configuring the HP StoreOnce Backup System for NAS (NFS)
DEVICE
MSL G3 Series
DEVICE
Ultrium 3-SCSI
/dev/rmt/c33t2d0BESTn
/dev/rmt/c33t2d0BESTnb
23