Brocade Communications Systems StoreFabric SN6500B Command Reference Manual page 1133

To troubleshoot TI zone problems:
To display details of the trunk members present in the TI zone and those not present in the TI zone:
3. Frame redirect zone commands
To create an RD Zone, given a host (10:10:10:10:10:10:10:10), target (20:20:20:20:20:20:20:20), VI
(30:30:30:30:30:30:30:30), and VT (40:40:40:40:40:40:40:40):
This command creates the following zone objects:
•
•
•
Fabric OS Command Reference
53-1002746-01
switch:admin> zone --showTIerrors
My Domain: 1
Error type:
Affected Remote Domain:
Affected Local Port:
Affected TI Zones:
Affected Remote Ports: 6, 7, 8, 9
switch:admin> zone --showTItrunkerrors
TI Zone Name: brackets
E-Port Trunks
Trunk members in TI zone: 16 18
Trunk members not in TI zone: 17
F-Port Trunks
Trunk members in TI zone: 4 5
Trunk members not in TI zone: 6
TI Zone Name: loop
E-Port Trunks
Trunk members in TI zone: 0
Trunk members not in TI zone: 1
TI Zone Name: operand
E-Port Trunks
Trunk members in TI zone: 8
Trunk members not in TI zone: 9 10
E-Port Trunks
Trunk members in TI zone: 16
Trunk members not in TI zone: 17 18
switch:admin> zone --rdcreate
10:10:10:10:10:10:10:10 20:20:20:20:20:20:20:20
30:30:30:30:30:30:30:30 40:40:40:40:40:40:40:40
restartable noFCR
RD zone "red_0917_10_10_10_10_10_10_\ 10_10_20_20_20_20_20_20_20_20", with a restricted
policy and no FCR support.
The base zone object, "red_______base".
The RD zone configuration, "r_e_d_i_r_c__fg".
ERROR
2
3
ti1, ti2
\
2
zone
\
\
1105