Brocade Communications Systems StoreFabric SN6500B Command Reference Manual page 1050

2
switchShow
To display media type information (relevant output excerpts only):
•
•
•
To display output when an authentication fails for a reason and the port gets disabled:
To display the neighbor switch WWN for the segmented ISLs during ELP and post ELP:
1022
1211 8 59 0
1212 8 60 0
1213 8 61 0
1214 8 62 8
1215 8 63 8
The following example shows switchshow output for the ge0 and ge1 ports on a Brocade 7800.
The ge0 port is a copper port (default). The ge1 has an SFP installed (copper or optical):
[...]
ge0 cu 1G No_Sync
ge1 id 1G No_Light
ge2 -- 1G No_Module FCIP
ge3 -- 1G No_Module FCIP
ge4 id 1G Online
ge5 -- 1G No_Module FCIP
[...]
This example shows switchshow output for a Brocade 5100. Port 31 has an SFP installed. Nothing
is installed on Port 32.
[...]
31 31 421f00 id
32 32 422000 --
[...]
The sfpShow output for the same switch displays the serial number for the SFP.
[...]
Port 31: id (sw) Vendor: BROCADE Serial No: UAF1081800000MK
Speed: 200,400,800_MB/s
Port 32: --
[...]
[...]
15 15 id N2 No_Light
[...]
switch:admin> switchshow
switchName: swd77
switchType: 71.2
switchState: Online
switchMode: Native
switchRole: Principal
switchDomain: 1
switchId: fffc01
switchWwn: 10:00:00:05:1e:a2:ec:9c
zoning: OFF
switchBeacon: OFF
Index Port Address Media Speed State
==============================================
0 0 010000 id
1 1 010100 id
2 2 010200 id
3 3 010300 id
4 4 010400 id
------ -- 16G
------ -- 16G
------ -- 16G
------ id 16G
------ id 16G
FCIP Copper
FCIP
FCIP
N4 In_Sync FC
N8 No_Module FC
Disabled (Authentication Required)
Proto
N8 No_Light
N8 No_Light
N4 No_Light
N4 No_Light
N8 No_Light
No_Module FC
No_Module FC
No_Module FC
No_SigDet FC
No_SigDet FC
Disabled
Disabled
FC Disabled (Persistent)
FC Disabled (Persistent)
FC
FC
FC Disabled (Persistent)
Fabric OS Command Reference
53-1002746-01