Brocade Communications Systems StoreFabric SN6500B Command Reference Manual page 1071

To pause monitoring of the resources class for a single element:
To continue monitoring of the resources class:
To configure the thresholds for memory usage monitoring:
To display the current memory usage and configuration:
To configure the threshold for monitoring system CPU usage:
To display the current memory usage threshold:
SEE ALSO
fwHelp, portFencing, portThConfig,
Fabric OS Command Reference
53-1002746-01
switch:admin> sysmonitor --pause
switch:admin> sysmonitor --show resource -current
Class |Area |Index |Value
---------|-------|------|---------|-------|--------------
RESOURCE |FLASH |000000|78
switch:admin> sysmonitor --continue
switch:admin> sysmonitor --show resource -current
Class |Area |Index |Value
---------|-------|------|---------|-------|--------------
RESOURCE |FLASH |000000|78
switch:admin> sysmonitor --config mem -poll 10 -retry 3
-limit 60 -action snmp,raslog
-high_limit 70 -low_limit -40
switch:admin> sysmonitor --show mem
Showing Memory Usage:
Used Memory
Total Memory
Free Memory
Used Memory Limit
Low Used Memory Limit : 40%
High Used Memory Limit: 70%
Polling Interval
No Of Retries
Actions
switch:admin> sysmonitor --config cpu -poll 20 -retry 4
-limit 70 -action snmp
switch:admin> sysmonitor --show cpu
Showing Cpu Usage:
Cpu Usage
Cpu Usage limit
Number of Retries
Polling Interval
Actions
resource -area all -index 0
|State |Monitoring
|InRange|Pause
resource -area all -index 0
|State |Monitoring
|InRange|Continue
\
: 192020k 25%
: 768080k
: 576060k
: 60%
: 60 seconds
: 3
: none
: 21.9%
: 75%
: 4
: 120 seconds
: none
thConfig
2
sysMonitor
\
\
1043