Brocade Communications Systems StoreFabric SN6500B Command Reference Manual page 1108

2
uRouteShow
NOTES
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS
This command has the following operands:
slot
port
domain
EXAMPLES
To display the routing information of all the active ports:
To display the routing information of port 11 to domain 4 only:
SEE ALSO
portRouteShow,
1080
For bladed systems only, specify the slot number of the input port whose routes
are displayed, followed by a slash (/).
Specify the number of the input port whose routes are to be displayed, relative to
its slot for bladed systems. Use switchShow to display a list of valid ports. This
operand is optional; if omitted, the command displays routing information for all
input ports in the switch.
Specify a remote domain in the fabric for which routing information is to be
displayed. This operand is optional; if omitted, the routing information for all
domains in the fabric is displayed.
switch:admin> urouteshow
Local Domain ID: 3
In Port Domain Out Port Metric Hops Flags Next (Dom, Port)
----------------------------------------------------------
0 1 11
Type <CR> to continue, Q<CR> to stop:
11 2 0
Type <CR> to continue, Q<CR> to stop:
4 0
16 1 27
Type <CR> to continue, Q<CR> to stop:
27 2 16
switch:admin> urouteshow 1/11, 4
Local Domain ID: 3
In Port Domain Out Port Metric Hops Flags Next (Dom, Port)
---------- ------------------------------------------------
11 4 16
topologyShow
1000 1 D
1500 2 D
500 1 D
1000 1 D
1500 2 D
500 1 D
1,0
4,0
4,0
1,1
4,16
4,16
Fabric OS Command Reference
53-1002746-01