Brocade Communications Systems StoreFabric SN6500B Command Reference Manual page 1081

EXAMPLES
To set custom thresholds for the SFP class and temperature area for a 16G QSFP on a DC X8510-8:
To apply the new custom settings so they become effective:
To set high thresholds for the security class and login violation area with SNMP alerts and save the
thresholds nonpersistently:
To cancel the custom settings that have previously been saved nonpersistently.
To display the Fabric Watch configuration for the QSFP temperature on a DCX 8510-8:
Fabric OS Command Reference
53-1002746-01
switch:admin> thconfig --set sfp -area temp -sfptype qsfp \
-highth -value 32 -trigger above -action email
switch:admin> thconfig --set sfp -area temp -sfptype qsfp\
lowth -value 0 -trigger above -action raslog
switch:admin> thconfig --apply sfp -area temp -sfptype qsfp \
-action cust -thresh_level cust
switch:admin> thconfig --set security -area lv
-highth-value 0 -trigger above
-action snmp -nosave
switch:admin> thconfig --set security -area lv
-highth -value 0 -trigger below \ \
-action none -nosave
switch:admin> thconfig --cancel security -area lv
-action cust -thresh_level cust
switch:admin> thconfig --show sfp -area temp -sfptype qsfp
Class: SFP
SFP TYPE: QSFP
Area : TEMP
ThLevel : Def
ActLevel: Def
High :
Custom:
Default:
Low:
Custom:
Default:
\
TimeBase: None
Value : 85
Trigger : Above Action: Raslog
Trigger : Below Action: Raslog
TimeBase: None
Value : 85
Trigger : Above Action: Raslog
Trigger : Below Action: Raslog
TimeBase: None
Value : -5
Trigger : Below Action: Raslog
TimeBase: None
Value : -5
Trigger : Below Action: Raslog
thConfig
\
\
\
2
1053