Verifying The Installation; Upgrading The Xp Virtualization Adapter - HP StorageWorks XP10000 - Disk Array Administrator's Manual

3. Restart the SRM service using the vmware-dr command:
C:\>net STOP vmware-dr
The VMware Site Recovery Manager Service service is stopping.
The VMware Site Recovery Manager Service service was stopped
successfully.
C:\>net START vmware-dr
The VMware Site Recovery Manager Service service is starting.
The VMware Site Recovery Manager Service service was started
successfully.
4. Set any environment variables. See
If you change environment variables are changed, restart the SRM service. See step 3.

Verifying the installation

After a new installation or update, verify the version information by issuing the the XP Virtualization
Adapter help command:
For Windows:
%HORCMROOT%\HORCM\etc>rmsra −h
For UNIX
/HORCM/usr/bin/rmsra −h
The version is displayed as xx.xx.xx in the example below:
Ver&Rev: xx.xx.xx
Usage : rmsra
[-h]
[-XMLSTDOUT]
[-XMLSTDERR]
[-auto]
[sralog=path_name]
[loglvl=value]
[timeout=value]
[testMU=value]

Upgrading the XP Virtualization Adapter

XP Virtualization Adapter is upgraded using an executable (rmxpsra.exe).
XP Virtualization Adapter must be upgraded on both the local site SRM server (protected site) and
the remote site SRM server (recovery site).
To upgrade the XP Virtualization Adapter:
1. Confirm that SRM is enabled and that the EventLog, vpxd and vmware-dr startup types are
set to automatic.
2. Download rmxpsra.exe from the HP web page (http://www.hp.com/go/storage/vmware)
and save it in a temporary folder.
3. Browse to the temporary folder and run rmxpsra.exe.
24 Installing and removing XP Virtualization Adapter
"Environment
Help/Usage
Change XML_output to STDOUT.
Change XML_output to STDERR.
Start HORCM automatically.
Change STDERR_output to path_name.
Change logging level to ( quiet/error/warning/info/verbose/trivia ) on STDERR.
Specify timeout_value( in sec ) for UR/Async.
Specify MU# using for failover testing.
variables" on page 20.