Horcmx.conf On Secondary Site - HP StorageWorks XP10000 - Disk Array Administrator's Manual

Figure 8 horcmX.conf on Secondary Site
.
NOTE:
For failover testing on XP Continuous Access and XP Continuous Access Journal SVOL:
• if the XP Business Copy licence is not installed, SRM requires that SplitReplication is set to true.
if the XP Business Copy licence is installed, SRM requires that SplitReplication is set to true and
•
the MU number except 0 is specified as $RMSRATMU variable.
• communication between the HORCM of the primary site and the HORCM of the recovery site
• for non stop test of an application, XP Continuous Access Synchronous CTG or XP Continuous
Access Journal volumes must be used
Snapshot for failover testing
The point-in-time copy for failover testing must be created as volume using point-in-time-split (this
capability is supported for only XP Business Copy and XP Snapshot).
C:\HORCM\etc> paircreate
Required LUN ID
VMware ESX Server supports NAA version 6 information in Page 83 SCSI inquiry as UUID.
ESX Server, Datastore and SRM recognize a LUN using LUN WWN returned by XP disk array,
Therefore XP Virtualization Adapter returns the LUN WWN matching the datastore regardless of
Multi-Path IO (MPIO).
SCSI Inquiry Page0x83
g <group> -m grp -fq quick -pid <snapshotpool>
XP Virtualization Adapter Administrator Guide 15