Power Connections For The Primary Rack; Power Connections For The Second Rack - HP StorageWorks XP10000 - Disk Array Manual

Figure 5 Power connections for the primary rack
CAUTION:
The four PDU outlets (not all shown) are for internal power connections to the disk array only. Do not
connect any other equipment to these outlets. Using the outlets for any equipment other than the disk array
may compromise disk array reliability or availability.
The second rack, shown in
VAC, single-phase, 20-Amps. The caution regarding the use of the PDU outlets in the primary rack
applies equally to the second rack: they are for internal power connections to the disk array only.
Figure 6 Power connections for the second rack
HP offers the following AC power cables and connectors, which you can order individually (four each
are required per primary or second rack):
• HP 4.5 m power cord w/NEMA L6-30P plug
• HP 4.5 m power cord w/NEMA L6-20P plug
42 Electrical specifications for the XP10000 disk array
Figure 6, has four connections to AC power. Power requirements are 200