Command Reference
System Settings
The commands in this section are used to defined general system descriptions and settings for
the NAS 8000.
System Description
getSystemOid
Returns the OID for the NAS device (.1.3.6.1.4.1.11.10.2.1.9.1)
getSystemGlobalUniqueId
Returns the Global Unique ID for this device (a string of characters that uniquely identifies
this unit)
getSystemManagementUrl
Returns the Management URL for this SEMI-compatible device.
getNetworkSnmpActiveTrapDestList
Returns the complete list of "active" Trap Destinations.
System Events
getSystemHealth
Returns the current overall Health status for the system.
Status messages include:
setSystemEvent
Creates a System Event. Should be the proper size, no filler added.
clearSystemEvent
Clears a System Event. The Master Event Daemon (hpMed) will then handle things properly,
sending e-mail as well as the SNMP traps to the various targets.
58
outParam[0] = .1.3.6.1.4.1.11.10.2.1.9.1
outParam[0] = Global unique ID - per SEMI 1.0
outParam[0] = Management URL
outParam[0:n] = Management URL
outParam[0] = Health status (numeric)
outParam[1] = Health status (string)
OK
Warning
Critical
inParam[0] = Event (hpnSystemEvent)
inParam[1:2k] = vblVal (stringsMap) (pair of strings)
HP StorageWorks NAS 8000 Command Reference