Setstoragedasdscsiva7Xxxalias; Getstoragedasdscsiva7Xxxuniquename; Getstoragedasdscsiva7Xxxhealth; Getstoragedasdscsiva7Xxxrebuilding - HP StorageWorks NAS 8000 - Version 1.6.X Command Reference Manual

setStorageDasdScsiVa7xxxAlias

Sets the alias for the specified storage array.

getStorageDasdScsiVa7xxxUniqueName

Returns the unique name of the specified storage array.

getStorageDasdScsiVa7xxxHealth

Returns health status of the specified storage array.

getStorageDasdScsiVa7xxxRebuilding

Informs whether the specified storage array is in the process of rebuilding data.

getStorageDasdScsiVa7xxxRebuildPercentComplete

When a storage array is rebuilding data, Returns the percent complete.

getStorageDasdScsiVa7xxxCapacities

Returns the capacity and other configurations of the specified storage array.

getStorageDasdScsiVa7xxxRedundancygroupMinimumNumber

Returns the lowest numbered redundancy group of a VA7xxx array.
HP StorageWorks NAS 8000 Command Reference
outParam[0] = Alias
inParam[0] = SCSI VA7xxx DASD name
inParam[1] = Alias
inParam[0] = SCSI VA7xxx DASD name
outParam[0] = Unique name
inParam[0] = SCSI VA7xxx DASD name
outParam[0] = Health
inParam[0] = SCSI VA7xxx DASD name
outParam[0] = T (rebuilding) or F (not rebuilding)
inParam[0] = SCSI VA7xxx DASD name
outParam[0] = Rebuilding percentage (0-99)
inParam[0] = SCSI VA7xxx DASD name
inParam[1] = Units (B,MB,GB)
outParam[0] = Total capacity
outParam[1] = Unallocated capacity
outParam[2] = Allocated capacity
outParam[3] = Unincluded capacity
outParam[4] = Included capacity
outParam[5] = Redundant capacity
outParam[6] = Active spare capacity
inParam[0] = SCSI VA7xxx DASD name
inParam[1] = Redundancy group
Command Reference
33