Network Client Settings
These commands provide information about the network clients connected to the HP NAS
8000 system.
getNetworkClientInfoList
Returns a list of network clients currently connected to the HP NAS 8000 storage.
getNetworkClientInfoProtocol
Returns the protocol used by the specified network client.
getNetworkClientInfoName
Returns the network name of the specified client.
getNetworkClientInfoPath
Returns the path used by the specified client (that is, what part of the storage are they using).
getNetworkClientInfoVolume
Returns the name of the file volume being used by the specified client.
getNetworkClientInfoVolumeDir
Returns the name of the sub-directory being used by the specified client.
getNetworkClientInfoConnectTime
Returns the time the specified client connected to the HP NAS 8000 storage.
For display, you should always select one of the "locale" safe formats:
HP StorageWorks NAS 8000 Command Reference
outParam[0:N] = Network client IDs
inParam[0] = Network client ID
outParam[0] = Network protocol (telnet, NFS, Windows®, etc.)
inParam[0] = Network client ID
outParam[0] = Network name (xxx.xxx.xxx.xxx or DNS name)
inParam[0] = Network client ID
outParam[0] = Path used by client (if applicable)
inParam[0] = Network client ID
outParam[0] = Volume used by client (if applicable)
inParam[0] = Network client ID
outParam[0] = Sub-directory used by client within volume used by client (if applicable)
inParam[0] = Network client ID
inParam[1] = Optional format string (default is "%c")
outParam[0] = Date & Time according to format (default is "%m/%d/%Y%T")
%c - TIME & DATE for locale
%x - DATE for locale
%X - TIME for locale
Command Reference
29