Uninstall Safecom Go Lexmark - Lexmark X642E - X642E Administrator's Manual

2 SafeCom Go Lexmark
2.8

Uninstall SafeCom Go Lexmark

Before you uninstall SafeCom Go Lexmark you should first ensure that the
SafeCom Security Template is NOT used by any function:
1. Open a web browser and enter the IP address of the printer in the address
field. Use of JavaScript (Active Scripting) must be enabled.
Note: If you are uninstalling SafeCom Go 012xxx software (see Table 1 in
section 1.2) proceed to step 13.
2. Click Settings on the menu.
3. In the Other Settings list click Security.
4. Click Security Setup.
5. Under Advanced Security Setup click Access Controls.
6. Change any functions that use SafeCom to No Security. Normally
Solution 1, Copy Function and E-mail Function use the SafeCom Security
Template.
7. Click Submit.
D60711-14 32