LG MG160 User Manual page 87

guidelines in consultation with the
FDA and the other federal health
and safety agencies. The FCC
limit for RF exposure from wireless
telephones is set at a Specific
Absorption Rate (SAR) of 1.6
watts per kilogram (1.6 W/kg).
The FCC limit is consistent with
the safety standards developed by
the Institute of Electrical and
Electronic Engineering (IEEE) and
the National Council on Radiation
Protection and Measurement. The
exposure limit takes into
consideration the body's ability to
remove heat from the tissues that
absorb energy from the wireless
phone and is set well below levels
known to have effects.
Manufacturers of wireless phones
must report the RF exposure level
for each model of phone to the
FCC. The FCC website
(http://www.fcc.gov/oet/ rfsafety)
gives directions for locating the
FCC identification number on
your phone so you can find your
phone's RF exposure level in the
online listing.
8. What has the FDA done to
measure the radio
frequency energy coming
from wireless phones?
The Institute of Electrical and
Electronic Engineers (IEEE) is
developing a technical standard
for measuring the radio
frequency energy (RF) exposure
from wireless phones and other
wireless handsets with the
participation and leadership of
FDA scientists and engineers.
The standard, "Recommended
Practice for Determining the
Spatial-Peak Specific Absorption
Rate (SAR) in the Human Body
Due to Wireless Communications
Devices: Experimental
Techniques," sets forth the first
87