Table of Contents
Advertisement
Close the holder.
The Battery
Your mobile phone comes with a nickel metal hydride
(NiMH) battery. The battery is not charged when you
buy your phone, but there may be enough power to
turn on the phone. We recommend that you charge the
battery before you use the phone.
To Attach the Battery to the Phone:
Œ
Place the battery on the back of the phone.
Press the battery upwards and against the
phone until it snaps into place.
4
Lock the holder by
pressing it down and
sliding it in the di-
rection of the arrow
in the picture.
To Remove the Battery
Make sure that the phone is turned off before removing
the battery (see next chapter). Then:
To Charge the Battery
Make sure that the battery is attached to the phone.
Then:
Œ
Connect the charger to the mains. (The box may
contain more than one mains plug. In this case,
use the one that fits the wall socket.)
Press
to enter the menu system. See inside the cover.
Œ
Press the catch on
the bottom of the
battery.
Lift the battery up
and away from the
phone.
Advertisement
Table of Contents
