Table of Contents
Advertisement
’
Press
CLR
Note!
If by accident you end up with your phone displaying a
language you do not understand, you can return to Eng-
lish by pressing
Setting the Time
The time is shown at the bottom of the display. When
you buy your phone, the time is normally not set.
If you want to set the time:
Œ
Press the navigation key
menu appears.
L
R
Press
YES
Ž
Press the navigation key
L
R
clock' menu appears.
Press
YES
Enter the correct time in hours and minutes and
L
R
press
YES
‘
Press
CLR
Note!
The time is by default presented in the 24-hour format.
If you prefer the 12-hour format, you can change the
default setting.
For more information, see 'Personalizing Your Phone'.
To Set the Ring Signal Level
Œ
Press the navigation key
The text 'Ring level' and a bar representing the
L
R
ring signal level appears in the display.
QQQqqq
Press
YES
Ž
Use the navigation key to set the ring signal
level.
• Pressing
• Pressing
The phone rings once with the actual setting as
you press the navigation key, except for the
'Off' and 'Step' settings.
8
to return to standby mode.
0000
at any time.
LEFT
RIGHT
until the 'Clock'
LEFT
to enter the 'Clock' menu.
until the 'Set
RIGHT
to enter the 'Set clock' function.
.
to return to standby mode.
.
RIGHT
to enter the 'Ring level' menu.
increases the volume.
RIGHT
decreases the volume.
LEFT
Press
to save the setting.
YES
Press
to return to standby mode.
CLR
Tip!
Use the volume keys on the side of the phone to change
the ring level silently.
Note!
If you have your SH 888 connected to external equip-
ment (for example handsfree equipment or a vibrating
call alert device), the ring signal level will be set for this
situation separately. See 'Personalizing Your Phone' for
more information.
Press
to enter the menu system. See inside the cover.
Advertisement
Table of Contents
