Nikon COOLPIX AW100 Reference Manual page 3

The S hooting Menu (a (Auto) Mode)
m
o
Continuous Shooting
Display the shooting screen in I_1 (Auto) mode (_51) _' MENU button _' I_1 tab (_11) _' Continuous
Change the settings for continuous shooting and BSS (Best %ot Selector).
Option Description
Single (default
[] setting) One picture is shot each time the shutter-release button is pressed.
While the shutter-release button is pressed all the way, images are
captured continuously at a rate of about 7.1 frames per second
Continuous H when the image mode is _ 4608x3456). Shooting ends when
the shutter-release button is released, or three pictures have been
taken continuously.
While the shutter-release button is pressed all the way, about
Continuous L 12 pictures are captured continuously at a rate of about 1.4 frames
)er second (when the image mode is [r_ 4608x3456).
BSSis recommended for shooting under low lighting without the
flash, with the camera at telephoto zoom position, or in other
BSS (Best Shot situations in which camera shake is likely to blur pictures.
B_S Selector) The camera takes up to ten images while the shutter-release button
is pressed all the way. The sharpest image (image with the most
details) in the series is automatically selected and saved.
Eachtime the shutter-release button is pressed
all the way, the camera shoots 16 pictures at a
rate of about 30 frames per second and arranges
Multi-shot 16 them in a single picture.
• The image mode is fixed at [] (2560 × 1920
pixels).
• The digital zoom is not available.
The icon for the current setting other than Single is displayed on the monitor (_6).
_1_ Notes on Continuous Shooting
• Focus, exposure and white balance are fixed at the values for the first picture in each series.
• The frame rate may become slower depending on the image mode, memory card type or
shooting conditions.
• This feature may not be used in combination with certain features. See"Features That Cannot Be
Used Simultaneously" (_63) for more information.
_I_ Note on Best Shot Selector
BSS is suited for shooting stationary subjects. BSSmay not produce the desired results if the subject
moves or the composition changes.
_I_ Note on Multi-shot 16
Banding or variance in brightness or hue may occur in images that were captured under lighting
that flickers at high speeds, such as fluorescent, mercury vapor, or sodium vapor lighting,