Nikon COOLPIX AW100 Reference Manual page 42

Changing the GPS or Electronic Compass Settings (Map Menu)
Option Description
Make the settings for the PO[ (points of interest,
location name information).
Embed POI: When set to On, the location name
information is recorded on the pictures to be shot.The
default setting is Off.
Display POI: When set to On, the location name
information is displayed on the shooting screen or
Points of interest (POI) playback screen. The default setting is Off. _'_60
Level of detail: Set the display level of the location
name information. A higher display level shows more
detailed regional information, and a lower display level
shows regional information for a wider area (such as
country names).
Edit POI: The level of the location name information
recorded on the image can be changed, and the
regional information can be deleted.
When log recording starts, the measured tracking
information for a certain duration is recorded until a
Create log preset time has elapsed (only when Record GPS data _'_61
in GPS options of the map menu is set to On).
• To display the log data, save it to a memory card.
View log Display the recorded log data on the map for checking _'_63
/our movement route.
Compass display: When set to On, the compass is
displayed on the shooting screen. The default setting is
off.
Compass correction: Corrects the compass when the
compass direction is not displayed correctly. Swing the
camera to draw a figure eight in the air while turning
/our wrist to face the camera forward and backward,
side to side, or up and down.
Electronic compass _'_64
\
c
_2J
91