Nikon COOLPIX AW100 Reference Manual page 27

Using ViewNX 2
Transferring Images to the Computer
1 Choose how images will be copied to the computer.
Choose one of the following methods:
• Direct USB connection: Turn the camera off and ensure that the memory card is
inserted in the camera. Connect the camera to the computer using the included USB
Cable UOE6 and then turn the camera on.
m
E _
• SD card slot: If your computer is equipped with an SD card slot, the card can be
inserted directly in the slot.
• SDcard reader:Connect a card reader(avai]ableseparatelyfrom third-party
suppliers) to the computer and insert the memory card.
Ira message is displayed prompting you to choose a program, select Nikon Transfer 2.
• When using Windows 7
If the dialog shown at right is displayed,
follow the steps below to select Nikon
Transfer 2.
1 A program selection dialog will be
displayed; select Import File using
Nikon Transfer 2 and click OK.
2 Double-clicklmport File.
If the memory card contains a large number of images, it may take a while for Nikon
Transfer 2 to start. Wait until Nikon Transfer 2 starts.
_1_ Connecting the USB Cable
The connection may not be recognized if the camera is connected to the computer via a USBhub,
76