Nikon COOLPIX AW100 Reference Manual page 16

In the following shooting modes, the camera uses face
detection to automatically focus on human faces. If
more than one face is detected, a double border is
displayed around the face that the camera will focus
on, and single borders are displayed around the other
faces.
Number of faces that FOCUS aiea (double b0rdei)
can be detected
Shooting mod e
(Easy auto mode) ({_138)
I_ (Auto mode) (AF area mode
(_51) is Face priority) Upto 12 The face closest to the camera
Portrait, Night portrait scene
mode (_3g)
The face closest to the center of
Smart portrait mode (_4g) Up to 3 the frame
• When I_ (easy auto) mode is selected, the focus area changes depending on which scene the
camera automatically selects.
• When using Face priority, if you press the shutter release button halfway while no faces are
detected, the camera automatically selects one or more of the nine focus areas containing the
subject closest to the camera.
• if no faces are detected when the shutter release button is pressed halfway in Portrait or Night
portrait scene mode or smart portrait mode, the camera will focus on the subject at the center of
the frame.
_1_ Notes on Face Detection
• The camera's ability to detect fdces depends on a variety of factors, including whether or not the
subject is facing the camera. Additionally, the camera may be unable to detect faces in the
following situations:
When faces are partially hidden by sunglasses or otherwise obstructed
When faces take up too much or too little of the frame
• When the frame includes more than one face, the faces detected by the camera and the face on
which the camera focuses depend upon a variety of factors, including the direction in which the
subject is facing.
• in some rare cases, such as those described in "Autofocus" (_31), the subject may not be in focus
even though the double border turns green, if the camera does not focus, use "Focus Lock"
(_67).
[] Viewing Pictures Taken Using Face Detection
• During playback, the camera automatically rotates images according to the orientation of the
faces that were detected at the time of shooting, (Pictures taken when using Continuous (_52)
are not rotated,)
• When zooming in on an image displayed in full frame playback mode by pressing the zoom
button T (¢{), the image is enlarged at the center of the face that was detected during shooting
(_33), (Pictures taken when using Continuous (_52) are not displayed,)
o
5"
t_
65