Sony CMT-CP11 Operating Instructions Manual page 2

Micro hifi component system
Hide thumbs Also See for CMT-CP11:
Table of Contents

Advertisement

To prevent fire or shock hazard, do not
expose the unit to rain or moisture.
To avoid electrical shock, do not open the cabinet.
Refer servicing to qualified personnel only.
Do not install the appliance in a confined space,
such as a bookcase or built-in cabinet.
i
i
CLASS 1 {J_SER PRODUCT
LU(_AN
I IJ_SE _LAITE
Y_J_SS _ LA,_E_PPAP,
A_
This appliance is classified as
a CLASS 1 LASER product.
The CLASS I LASER
PRODUCT MARKING is
located on the rear exterior.
NOTICE
FOR
THE CUSTOMERS
IN
THE
U.S,A.
_J,_TION; T_ RI_
'iHE RISI( (_ L_I_CTRICI_
_:_ NOT R_MOVE COV_R (C_ eAC_
This symbol is intended to alert the
user to the presence of uninsulated
"dangerous voltage" within the
product's enclosure that may be of
sufficient magnitude to constitute a
risk of electric shock to persons.
This symbol is intended to alert the
user to the presence of important
operating and maintenance (servicing)
instructions in the literature
accompanying
the appliance.
CAUTION
The use of optical instruments with this product will
increase eye hazard.
INFORMA
TI ON
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications.
However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
- Reorient
or relocate
the receiving
antenna.
- Increase the separation
between
the equipment
and
receiver.
- Connect
the equipment
into an outlet on a circuit
different
from that to which the receiver
is
connected.
- Consult the dealer or an experienced radio/TV
technician for help.
CAUTION
You are cautioned that any changes or modifications
not expressly approved in this manual could void
your authority to operate this equipment.
NOTICE
FOR THE
CUSTOMERS
IN
CANADA
CAUTION
TO PREVENT ELECTRIC SHOCK, DO NOT USE
THIS POLARIZED AC PLUG WITH AN
EXTENSION CORD, RECEPTACLE
OR OTHER
OUTLET UNLESS THE BLADES CAN BE FULLY
INSERTED TO PREVENT BLADE EXPOSURE.
This system is equipped with the Dolby* B-type noise
reduction system.
* Dolby noise reduction manufactured under license
from Dolby Laboratories Licensing Corporation.
"DOLBY" and the double-D symbol lift are
trademarks of Dolby Laboratories Licensing
Corporation.
©
A_146
2

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents