Front Panel; Back Panel - CyberHome DVR 1600 Operation Manual

Front Panel
@
_ Cyb_tH@_ DVR 16_ _w _co_t_ WlT_ p_6_ESSlVE SCA_ p_AySACK
- Loads DVD+R/RW, DVD, CD-R/RW,
DISC TRAY
VCD/SVCD, MP3, JPG and other optical discs.
FRONT DISPLAY The front Vacuum F!ourescent
DispEay shows information about the unit's
operation, such as current chapter and elapsed
time during playback.
OPEN/CLOSE - Press to open or dose the disc
tray.
- Begins pEayback a disc, chapter
PLAY/PAUSE
of
or track. Press again during playback to pause,
and again to resume pEayback.
RECORD - Begins a Live Recording.
ON / STANDBY Turns the unit and sends the
on
unit to standby mode. Unstandby mode, the unit
will use a minute amount of power to enable
power-on by the remote control.
DV tN - Front DV Unputfor recording. To select,
use the SOURCE key and select DV UN.
LEFT/RiGHT AUDtO iN 2 - Front Stereo Audio
Unputsfor recording. These inputs are shared with
the VIDEO IN 2 input.
COMPOSITE WDEO IN 2 - Front Composite
Video Input for recording. To select, use the
SOURCE key and select VIDEO IN 2. AV Inputs.
Back Panel
POWER CORD SOCKET - Plug the matching end
of the power cord into the unit before connecting
the other end to the wall socket.
ANTENNA IN / OUT - For Antenna or Cable TV
connection. Passthrough connection to TV does
not transfer the output signal from the DVD
Recorder.
WDEO INPUT 1 - Composite Video input for
recording. To select this input, use the SOURCE
button and choose VIDEO IN 1.
STEREO AUDIO OUTPUT - Connect to TVs or
other audio equipment supporting Stereo Audio in.
COMPOSITE WDEO OUTPUT - Standard Video
Output supported by most TVs.
S-WDEO INPUT - S-VIDEO input for recording. To
select this input, press SOURCE and choose S-
VIDEO IN.
STEREO AUDIO INPUTS - Use with S-VIDEO IN
1 or VIDEO IN 1 for recording.
@ COAXIAL DIGITAL AUDIO OUTPUT - Use a
special Coaxial Digita! Cable to send the raw
coded digital signal to devices supporting digital
decoding.
@ S-WDEO OUTPUT Connect TVs with S-
to
VIDEO in for better picture quality than standard
composite video.
@ CONPONENT/PROGRESSIVE SCAN WDEO
OUTPUT - Use this output with TVs supporting
Component Video or Progressive Scan input for
best video quality. Select the PROGRESSIVE
SCAN MODE in the Recorder's SETUP MENU for
P-SCAN TVs.