Connecting Additional Devices; Connecting Additional Devices To The Second Scart Socket; Connecting Additional Devices To The Front Sockets; Best Picture Quality - CyberHome 1600 User Manual

CONNECTING ADDITIONAL DEVICES

DVD-PLAYER etc.
POWER
ON ON
OFF OFF
7
EXT2 AUX
DV IN
DVD-PLAYER etc.
L R V
VIDEO IN 2
L AUDIO IN R
1
Connecting additional devices to the second SCART
socket
You can connect additional devices such as decoders, satellite receivers,
DVB-T set-top boxes, DVD players, video recorders etc. to the "EXT2
AUX" (SCART-2) socket. When playback on these additional devices is
CH-DVD 402 CH-DVD 402
started, the DVD recorder automatically connects the "EXT2 AUX"
(SCART-2) socket with the "EXT1 TO TV" (SCART-1) socket. You will
then see the picture from the additional device on your TV.
Attention:
In order to see the picture from the additional device on your TV, you need
to select the video input source "Video 1" or "S-Video" by pressing the
button "SOURCE" on your remote control. If the picture is black and white,
please switch the input source from SCART "Video 1" to SCART "S-
Video".
Note:
Most pre-recorded video cassettes and DVDs are copy-protected. You
cannot copy them.
2

Connecting additional devices to the front sockets

Video input sockets for connecting devices with composite video output or
DV output, e.g. DVD player, video recorder, camcorder (video input source
"Video 2" or "DV"). For easy copying camcorder recordings, please use
the front sockets. These sockets are located on the right side of the front
panel.
CAMCORDER

Best picture quality

If you have a DV / Digital 8 camcorder, connect the "DV IN" input of the
DVD recorder to the appropriate DV output on the camcorder. Use the but-
ton "SOURCE" for selecting the video input source "DV".

Good picture quality

If you have a camcorder, DVD player, video recorder etc. that has a single
video output (composite video, CVBS), connect the "VIDEO IN 2" input of
the DVD recorder to the appropriate video output on the camcorder, DVD
player or video recorder. You must also connect the audio input "L AUDIO
IN R" on the DVD recorder to the audio output on the camcorder, DVD
player or video recorder. Use the button "SOURCE" for selecting the video
input source "Video 2".
24