22 Adjustment; Associated Choke Type; Throttle Cable Installation, Adjustment - Cub Cadet RZT 50 Operator's Manual

22 ADJUSTMENT
Two types of ct-_e controlare used _r FH601V,
FH_IV, F_0V, FH721V Model Engine.
Associated choke type
Throttle Cable Installation, Adjustment
Make _re that thethroffielever on the equipment
hasbeen linkedtothe enginewith thethrottle _ble.
• Leave the _ble damp bolt (A) loose.
• _ign the hole (B) in the wed contro_ lever (C)
withthe hole(D)in the base plate (E) movingthe
lever (C); in_ 6 mm diao pin (or 6 mm bolt)
throughtwo holes,
• Pull up the outer housing(F)of the throttle cable
untilthe inner wire (G) has alrr'_ost n o slack, and
tightenthe _ble damp bok (A), Removethe6 mm
dia, pin.
Make sure _ the carburetor choke valve (M)
is closedcompletely_en the throttle lever on the
equipmentis moved to _HOKE" position. If not,
perform=CHOKEADJUSTMENT.
Choke Adju_ent Assoc|ated Choke _pe
• Stoop the engine.
• _ign the hole (B) in the wed contro] lever (C)
with the hole (D) in the base plate (E) by m_ng
the lever (C); inse_ 6 mm dia. pin (or 6 mm bolt)
throughtwo ho_,
• Turn the _oke settingscrew(I) sothat _ clear-
ante betweenthe screwendand the tongueofthe
lever(J) iszero, Removethe 6 mm d_, pinor boR.
• Make sure that the choke valve can moveto full
open side and _il closeside by turningthe lever.
H. Throttle Valve
M. Choke Valve
ADJUSTMENT 23
FHI44 YOml| 0
42