Epson GT-12000 User Manual page 71

3. Determine the direction of scanning using PageManager.
For details on using PageManager, see the online help that
comes with the software.
4. Make your settings in EPSON TWAIN Pro and click the
Scan button. See Chapter 3 of the EPSON TWAIN Pro
User's Guide for details on making EPSON TWAIN Pro
settings. Then click Scan.
Scanning only part of an image
To scan just a part, or parts of an image, follow the steps below.
1. Load paper in the Auto Document Feeder as described on
page 3-22.
Note:
Do not scan more than one page at a time when scanning only
part of an image; otherwise the extra pages may not feed properly.
2. Start the PageManager software and select Acquire from
the File menu.
3. Click Preview. The document is ejected after previewing.
4. Make a marquee (frame around a certain area) to define the
part of the image you want to scan by dragging the mouse
pointer over that area. If necessary, make multiple
marquees to scan multiple parts of the image. See Chapter
3 of the EPSON TWAIN Pro User's Guide for information on
making marquees and settings in EPSON TWAIN Pro.
5. Replace the document the same way you placed it in step 1,
and close the Document Feeder.
6. Determine the direction of scanning using PageManager.
For details on using PageManager, see the online help that
comes with the software.
3-25
Options