Listening To The Radio; Advanced Usb Playback - Sharp HT-DV40H Operation Manual

HT-DV40H
Advanced USB playback (continued)
HT-DV50H
To cancel random playback, press again the SHIFT and RANDOM
buttons, so that the random indicator will disappear.
Notes:
If you press the
can move to the track selected next by the random operation.
In random play, the unit will select and play tracks automatically.
(You cannot select the order of the tracks.)
If you press the REPEAT button during random play, playback will
enter repeat mode and random will be cancelled.
In random function, playback will continue until
pressed.
Caution:
After performing repeat, be sure to press the
Otherwise, it will play continuously.
Notes:
This unit only supports "MPEG-1 Audio Layer-3" and "MPEG-2
Audio Layer-3" format. (Sampling Frequency is 32, 44.1, 48kHz)
"MPEG-2.5 Audio Layer-3" and MP1, MP2 format are not
supported.
Playback order for MP3 files may differ sometimes depending on
the writing software used during file download.
Bitrate which is supported by MP3 is 32~320 kbps, WMA is
64~160 kbps.
For MP3/WMA files, please put ".MP3" ".WMA" extension. Files
cannot be played back if there is no MP3/WMA extension.
Playlists are not supported on this unit.
This unit only supports MP3 ID3-Tag version 1.x.
The display playback time may not be displayed correctly when
playing back a variable bitrate file.
Copyright protected WMA files cannot be played back.
52
or button during random play, you
button.

Listening to the radio

button is
Tuning
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TUNER button on the remote control.
3
Press the TUNING (
desired station.
Manual tuning:
Press the TUNING (
to tune in to the desired station.
Auto tuning:
When the TUNING (
seconds, scanning will start automatically and the tuner will
stop at the first receivable broadcast station.
1 2 3
4 5 6
7 8 9
0 +10
or ) button to tune in to the
or ) button as many times as required
or ) button is pressed for more than 0.5