Table of Contents
Advertisement
Chapter 3 Using the Network Scanner
6
Touch the
The following screen appears.
7
Press the START key.
INTERRUPT
CLEAR ALL
CA
CLEAR
C
When using the RADF or RSPF, sending starts after all the originals have been scanned.
From the document glass, only one page at a time can be sent. When you send multiple-page
documents, repeat the steps replacing the original on the document glass (in case of 2-sided
originals, reversing the face of the original) and press the START key by the necessary times
before the auto clear functions, which is set in the copier's Key Operator Program (the factory
default setting is 60 seconds). If the auto clear has functioned during the scanning, you need to
newly repeat the above steps 4 to 7.
key.
START
Only one destination can be selected at a time. When
sending to multiple destinations, repeat steps 4 through
6 for each destination.
16
Advertisement
Table of Contents
