Sharp AR-NS1 Operation Manual page 11

5
This brings up the E-mail/Network Scanning Setup web page. From this page you can make
changes to the items as listed in the following table:
E-mail Setup
Item
Name
Machine Code
Machine Location
Primary E-mail
Server (*1)
Secondary
E-mail Server
E-mail Time Out
Reply Address (*2)
Time Zone
Description
Enter a unique name for the machine within 50 characters.
This field is not used with normal use. Some kind of software may use this
field to identify the machine.
Enter a unique entry for the machine location within 100 characters.
Enter an IP address for the primary e-mail server or a host name.
Enter an IP address for the secondary e-mail server or a host name. No
need to enter if secondary e-mail server is not set up.
Enter a time out period, from 0-60 seconds, that the system will wait for as
it attempts to connect to the primary server. The default is 20 seconds. If no
connection is made, the system will then look for the secondary server if it
has been set up. If not, the system will stop attempting to connect.
Enter an e-mail address to which the machine returns an unsuccessful
delivery message when the distribution has failed. Only 1 e-mail address
can be entered. The entered e-mail address is also used as sender e-mail
address.
Select the time zone of the place to use this Network Scanning System. A
specific time zone is set after the selection.
*1. 2.: If no e-mail server is used on your network, enter "0" in this field.
7
Chapter 2 Getting Started