Sending Documents From Memory - Sharp FO-1530 Operation Manual

all-fo1530a.book Page 73 Tuesday, December 5, 2000 2:07 PM

Sending Documents From Memory

With this function, the original document is scanned immediately, stored in memory,
and then transmitted once the connection to the receiving machine is made. This is
convenient when transmitting to places where the line is often busy, as it saves you
from waiting to pick up the original document and frees the feeder for other
operations. After transmission, the document will be cleared from memory.
♦
Only one memory transmission can be set at a time.
♦
The amount of memory currently occupied appears as a percentage in the display
while the document is being scanned.
1
Load the document(s).
•
Set the resolution and/or contrast if
desired.
RESOLUTION
2
Press the MEMORY key and then
1.
MEMORY
ENTER STATION #
Sending Documents From Memory
3
•
•
•
4
1
•
Enter the number of the receiving
machine using one of the following
methods:
Press a Rapid Key.
Press the SPEED DIAL key and
enter a Speed Dial number.
Enter a full telephone number by
pressing the number keys.
01 02 03
20 21 22
SHIFT
04 05 06
07
24 25
23
26
(Example)
Press the START key if you
entered a Speed Dial number or a
full number.
START
The document will be scanned and
stored in memory. Your fax will then
dial the receiving machine and
transmit the document (redialling
will take place automatically if
necessary).
73