Batch Page Numbering - Sharp FO-1530 Operation Manual

all-fo1530a.book Page 70 Tuesday, December 5, 2000 2:07 PM

Batch Page Numbering

Batch Page Numbering
You can change the page numbering of the transmitted document from simple
numbering ("P .1", "P .2", etc.) to batch numbering, which means that a slash and the
total number of pages being sent are added after each page number (for example,
"P . 1/5", "P .2/5", etc.). This allows the receiver to check for missing pages.
1
Load the document(s).
•
The document must be loaded
before batch page numbering can
be set.
2
Press these keys:
FUNCTION
PAGE COUNTER SET
3
Enter the total number of pages
("01" to "99") by pressing the
number keys.
0
•
If you are sending a cover sheet,
do not include it in the total number
of pages (the number will be
adjusted automatically).
70
8
Example:
Eight pages
4
Dial the receiving machine and
transmit the document.
Comments:
♦
If you need to cancel a batch
number entry, remove the
document from the feeder or press
the STOP key.
♦
If the number of pages actually
transmitted does not coincide with
the batch number entered, the
alarm will sound and PAGE
COUNT ERROR will appear in the
display. PAGE E. will also appear in
the NOTE column of the
Transaction Report if it has been
set to print out.