Sharp CD-MPX870 Operation Manual page 35

4
Within 10 seconds, press the
lect "ONCE SET" or "DAILY SET", and press the MEMORY
button.
5
Press the or button to select "PLAY" or
"REC", and press the MEMORY button.
White
The illustrations show the daily timer setting.
6
Press the or button to adjust the hour and
then press the MEMORY button.
The illustrations show the timer playback setting in the daily tim-
er mode.
7
Press the or button to adjust the minutes and
then press the MEMORY button.
8
Set the time to finish as in steps 6 and 7 above.
9
or button to se- Switch input with the
press the MEMORY button.
To select the timer playback source: CD, TUNER, TAPE 1 or
TAPE 2.
To select the timer recording source: TUNER.
When you select the tuner, select a station by pressing the
ton.
If a station has not been programmed, "NO PRESET" will
be displayed and timer setting will be canceled.
Red
10
Adjust the volume using the VOLUME control, and then
press the MEMORY button.
Do not turn the volume up too high.
11
Press the ON/STAND-BY button to enter the power stand-
by mode.
The "TIMER" indicator lights up and the unit is ready for timer
playback or timer recording.
03/12/19
or button, and then
or button, and then press the MEMORY but-
Continued to the next page
CD-MPX870 33-42.fm
CD-MPX870
CD-MPX870W
ENGLISH
E-34