Toshiba Tecra A3 Maintenance Manual page 15

1 Hardware Overview
BIOS
• 1MB Flash ROM for system BIOS.
a) Suspend to RAM/Disk.
b) Password protection (System).
c) Various hot key for system control.
d) Refreshable
e) ACPI compliant BIOS
Power
• 12-cell Li-Ion smart battery pack with 10.8V*8600mAh capacity or 6-cell Li-Ion
smart battery pack with 10.8V*4300mAh capacity (depending on the models).
• Approximately 12 hours or longer charge time to 100% battery capacity with the
system on.
• Approximately 4 hours or longer charge time to 100% battery capacity with the
system off.
• Approximately 2 days discharge time in standby mode for 12-cell battery and 1 day
for 6-cell battery.
• Discharge time in shutdown mode is approximately 1 month.
HDD
• One 2.5", 9.5mm hard disk with capacity 30GB/40GB/60GB/80/100GB/120GB
• Bus Master IDE
• 9.5mm, 2.5"HDD Support
• Support Ultra 100 synchronous DMA
ODD Devices
One of the following:
• 5.25" 12.7mm height COMBO device
• 5.25" 12.7mm height DVD Dual device
• 5.25" 12.7mm height DVD Super Multi device
• 5.25'' 12.7mm height DVD-ROM device
• 5.25'' 12.7mm height CD-ROM device
Optional Devices
• 256MB/512MB/1GB SO-DIMM modules
• MINI PCI module (802.11a+b+g Wireless LAN module/802.11b+g Wireless LAN
module)
• MDC Modem
• Bluetooth modem
• Dual-Band build in Antenna for Wireless LAN Communication.
1-6
1.2 System Unit
Tecra A3/S2 Series Maintenance Manual