Toshiba Tecra A3 Maintenance Manual page 118

Installing the HDD Module
To install the HDD module, follow the steps below and refer to the figures in the preceding
section.
1. Insert the HDD module into the HDD slot.
2. Secure the HDD door with two black M2.5x5 screws.
Disassembling the HDD Module
To take apart the HDD, first remove it from the computer as described earlier.
1. Remove four M3x3 screws securing the HDD mounting brackets to the HDD. There are two
on each side.
Tecra A3/S2 Series Maintenance Manual
M3X3
Figure 4-7 Removing the HDD bracket
4 Replacement Procedures
M3X3
4-11