Sharp AR-M200 Operation Manual page 2

In some areas, the "POWER" switch positions are marked "I" and
" " on the copier instead of "ON" and "OFF".
If your copier is so marked, please read "I" for "ON" and "
"OFF".
Caution!
For a complete electrical disconnection, pull out the main plug.
The socket-outlet shall be installed near the equipment and
shall be easily accessible.
Shielded interface cables must be used with this equipment to maintain
compliance with EMC regulations.
Do not make copies of anything which is prohibited from copying by law. The
following items are normally prohibited from copying by national law. Other items
may be prohibited by local law.
Money Stamps
Checks Passports
Bonds Stocks
Driver's licenses
" for
Bank drafts