Solutions When You Cannot Connect Projectors Using Advanced Connection Mode (Wireless); Solutions When You Cannot Connect Projectors Using Advanced Connection Mode (Wired) - Epson PowerLite Home Cinema 3100 User Manual

• Check the computer's network settings.
• If the wireless LAN adapter is not installed on your computer, install a wireless LAN card on your
computer.
• Enable the wireless LAN setting or AirPort on your computer.
• Check the software settings.
• If a user other than the moderator has established a connection and the projected image remains as
it is, you can interrupt the current connection to project your screen.
If a Projector Keyword is set for the projector but you do not know the keyword, display the Home
screen to check the projector keyword.
If your projector does not have a Home screen, restart the projector and check the keyword
displayed on the LAN standby screen.
• Make sure you start the software in the connection mode that you set on the projector. If you cannot
select or change the connection mode, select Display Connection Mode Selection window on
startup on the General settings tab in the Set options screen. The select connection mode
screen is displayed after restarting the software.
Parent topic:
Related references
Set options - General settings
Solutions When You Cannot Connect Projectors Using Advanced Connection Mode
(Wireless)
When you cannot connect the computer and the projector using Advanced Connection Mode over a
wireless network, try the following solutions. If you cannot resolve the problem, contact your network
administrator.
• Check the status of the external devices used for the network connection or the environment in which
the network devices and the projector are located.
• Connect the specified wireless LAN unit to the projector securely. See your projector User's Guide
for more details.
• Check for any obstacles between the access point and the computer or projector, and change their
position to improve communication. Sometimes, indoor environments prevent the projector from
being found in a search.
• Make sure that the access point and the computer or projector are not too far apart. Move them
closer together and try to connect again.
Solving Network Connection Problems
69