Table Of Contents Beginning Of Chapter - Sharp AR-C260 Printer Operation Manual

PRINTER CONFIGURATION THROUGH THE NETWORK
Access setup
The restrictions on access to the Web pages and basic settings for using the network scanner and the status/alert
E-mail function are described below.
I I I I Network Card Setup
A link to the network card Web page for configuring the print server card (network interface card) is provided. The
Admin password is the same as the Web Page password of the network card.
I I I I Password Setup
Password access to the Web pages can be set. Two types of passwords (user and administrator) are
configurable.
A user password allows the user to store, edit, and delete transmission destinations. An administrator password
provides the same rights as a user password, but also allows configuration of all administrative settings, including
basic network scanner settings and e-mail status alert settings.
I I I I Network Scanning Setup
Basic setting screen for the network scanner. E-mail subject for scanner delivery, file name, etc. are set. To use
the network scanner, you must set up E-mail & DNS Setup. This screen displays the E-mail & DNS Settings and
provides a link to E-mail & DNS Setup.
I I I I Status & Alert E-mail Setup
Basic setting screen for the status & alert E-mail system. Machine name, machine code, and machine installation
location are set. To use the status & alert E-mail function, you must set up E-mail & DNS Setup. This screen
displays the settings of E-mail & DNS Settings and provides a link to E-mail & DNS Setup.
I I I I E-mail & DNS Setup
Basic setting screen for transmitting E-mail. E-mail server, system administrator address, DNS server, etc. are
set.
I I I I Sender E-mail Setup
The sender of E-mail transmissions from the network scanner is configured. The sender will be set as the "From"
item of the E-mail header. Up to 20 senders can be registered and a sender can be selected among them from
the operation panel.
I I I I Custom Directory Setup
User index names in the display list on the operation panel are set.
I I I I Status Message Parameters Setup
The parameters used when the current counter information of this machine such as print count, copy count, and
total output is delivered in accordance with the specified schedule by an E-mail status message.
I I I I Alerts Message Parameters Setup
The parameters for the alert message address information are registered by alert message setup. The alert
message is transmitted when a problem such as a supplies requirement (toner or paper) or errors(device failure
or paper misfeed) occur.
I I I I SNMP Trap Setup
IP addresses, trap community, and authentication community are set.
TABLE OF CONTENTS BEGINNING OF CHAPTER 3-4