Sharp AR-C260 Printer Operation Manual page 17

Account Number
When the "AUDITING MODE" of the key operator
program is turned on, a count can be kept of the
number of sheets printed by each account.
Account numbers
programmed using the key operator program for
the printer sheet count. To program an account
number, see "Key operator programs".
When the "ACCOUNT LIMIT SETTING" (key
operator program) is turned on, printing is not
permitted after the page count reaches the limit.
When this happens, a notice page is printed
(unless the "Prohibit notice page printing" of the
key operator program has been turned on).
When the "CANCEL
ACCOUNTS" of the key operator program is
turned on, printing will not take place if an invalid
account number is entered, or if printing is
executed without entering an account number. If
you want printing be allowed even if a valid
account number is not entered, turn this setting
off. In this case, pages printed by an invalid
account number will
"OTHERS" count.
Default Job ID
Use this setting to select the default user name
and job name that appear in the machine's
operation panel. Note that if "Always Use This ID"
is not selected, the Windows login name and the
job name set in the application will be
automatically used.
The names that appear here will also appear in
the operation panel in the dialog box that appears
when printing is executed.
[User Name]
Use this setting to select the default "User Name"
that appears in the machine's operation panel. If
"Always Use This ID" is selected, the name
entered here will appear in the machine's
operation panel. If "Always Use This ID" is not
TABLE OF CONTENTS
SELECTING PRINTING FUNCTIONS Frequently used settings (continued)
for this purpose are
JOBS OF INVALID
be included in the
BEGINNING OF CHAPTER
selected, the Windows login name will be
automatically used.
Up to 16 characters can be entered.
Default setting: Username unknown
[Job Name]
Use this setting to select the default "Job Name"
that appears in the machine's operation panel. If
"Always Use This ID" is selected, the name
entered here will appear in the machine's
operation panel. If "Always Use This ID" is not
selected, the job name set in the application will
be automatically used.
Up to 30 characters can be entered.
Default setting: Jobname unknown
[Always Use This ID]
This allows you to select whether to automatically
obtain the "User Name" and "Job Name"
displayed in the machine's operation panel, or
whether to use the names entered in this dialog
box.
Not selected ....... The Windows login name will
be automatically used for the
"User Name", and the job
name set in the application will
be automatically used for the
"Job Name".
Selected ............. The names entered in this
dialog box will appear in the
machine's operation panel.
Default setting: Not selected
2-5