Sharp AR-C260 Printer Operation Manual page 24

SELECTING PRINTING FUNCTIONS Color settings (continued)
Image
Use this item to adjust the brightness and
contrast.
[Brightness]
This indicates the brightness of colours. The
brightness can be set to a value from 0 to 100.
Colours appear closer to white as the value is
increased.
Default setting: 50
[Contrast]
This shows the amount of contrast between white
and black. The contrast can be set to a value
from 0 to 100. The contrast increases as the
value is increased.
Default setting: 50
Defaults
Returns the image adjustment settings to the
default settings.
Color Balance
This item is used to adjust the colour saturation
and strengthen or weaken the R (red), G (green),
and B (blue) components of colour.
[Saturation]
This adjusts the colour saturation. Select a value
between 0 and 100.
Default setting: 50
[Red Strength]
Strengthens or weakens red.
Default setting: 50
[Green Strength]
Strengthens or weakens green.
Default setting: 50
[Blue Strength]
Strengthens or weakens blue.
Default setting: 50
TABLE OF CONTENTS
NOTE
These cannot be changed if the colour mode was set
to [Gray Scale] in step
BEGINNING OF CHAPTER
on page 2-11.
2-12