Sharp AR-C260 Printer Operation Manual page 37

Procedure for using key operator programs
The procedure for using key operator programs is explained here, using the "PRINTER SETTINGS" program as an
example.
Follow the same steps to use the programs explained on
Press the [CUSTOM SETTINGS] key.
1
2 Touch the [KEY OPERATOR PROGRAMS]
key.
ADDRESS
CONTROL
KEY OPERATOR PROGRAMS
3 Use the numeric keys to enter the five-digit
key operater code number.
KEY OPERATOR CODE
Supplementary explanation of key operation for key operator programs
KEY OPERATOR PROGRAMS
INTERFACE SETTINGS
A
PORT SWITCHING METHOD
B
ENABLE USB PORT
A The name of the program category or particular item to be set will appear on the touch key. A touch of the key
will select the item displayed.
B Check mark boxes are touch keys that show the status of selections. A box with a check mark means the
function is "on" (enabled) and an unchecked box means the function is "off" (disabled). Alternate touches of a
box will change the on/off status.
C The currently set numerical value is displayed.
D Numerical values can be set by touching the
TABLE OF CONTENTS
page 6-5
Touch the [PRINTER SETTINGS] key.
4
program explanations on
and then follow these steps to select a setting for
the program.
Make desired settings for the selected
5
program.
Detailed descriptions for program settings start on
the next page.
6 Press the [CA] key to exit the program.
ENABLE PARALLEL PORT
ENABLE NETWORK PORT
I/O TIMEOUT 20
and keys.
BEGINNING OF CHAPTER
KEY OPERATOR PROGRAMS
and following.
Follow these steps to
select the program that
PRINTER
you wish to use.
SETTINGS
In the following steps,
the setting screens for
the selected program
KEY OPERATOR
will appear. Refer to the
page 6-5
You will exit the key
operator programs and
return
screen.
These keys and indicator are
available on setting screens that
require the entry of numerical
values.
OK
C
and following,
to the main
(1 999)
20
D
6-3