Sharp PG-A10X-A Operation Manual page 68

Troubleshooting
Problem
Picture is green on
INPUT 1 COMPONENT.
Picture is pink (no green)
on INPUT 1 RGB.
Picture is dark.
Picture is too bright and
whitish.
This projector is equipped with a microprocessor. Its performance could be adversely affected by
incorrect operation or interference. If this should happen, unplug the projector and plug it in again
after more than 5 minutes.
-64
• Change the input signal type setting.
• The lamp indicator is illuminating in red. Replace the lamp.
• Picture adjustments are incorrectly set.
Check Page
37
55
36