Recording On A Cassette Tape - Sharp XL-UR5H Operation Manual

Recording on a cassette tape

Before recording:
When recording important selections, make a preliminary test to
ensure that the desired material is properly recorded.
SHARP is not liable for damage or loss of your recording arising
from malfunction of this unit.
The volume and sound controls can be adjusted with no effect
on the recorded signal (Variable Sound Monitor).
For recording, use only normal tapes. Do not use metal or
CrO tapes.
2
Erase - prevention tab of cassette tapes:
When recording on a cassette tape, make sure that the erase-
prevention tabs are not removed. Cassette have removable
tabs that prevent accidental recording or erasing.
To protect the recorded sound, remove the tab after recording.
Cover the tab hole with adhesive tape to record on the tape
without the tab.
Tab for side B
Side A
Tab for side A
Recording from CD or MP3/WMA disc or USB/
SD mass storage device
1
Press the ON/STAND-BY button to turn the power on.
2
Load a blank cassette.
3
Select "CD", "USB" or "SD" function.
4
Load the disc or USB or SD to be recorded.
Select the track number if required.
For programmed recording, programme the material in
advance (as described under "Programmed Play").
5
Press the RECORD button. The PLAY
engaged simultaneously and CD or USB or SD recording
starts.
When you want to record music as you listen, press the
RECORD button. Recording starts automatically from the
beginning of the track.
6
Press the STOP/EJECT
When the end of the tape is reached, the CD or USB or SD
player and deck stop automatically.
button is
/ button to stop recording.
XL-UR5H
31