Timer Play Indicator; Daily Timer Indicator - Sharp XL-UH25H Operation Manual

Timer and sleep operation (Remote Control only) (continued)
XL-UH25H
11
When the preset time is reached, playback will start.
The volume will increase gradually until it reaches the preset
volume.
12
When the timer end time is reached, the system will enter
the power stand-by mode automatically.
Once timer:
The timer will be cancelled.
The "r" indicator will blinking during timer playback.
Daily timer:
The timer will operate at the same time every day. It will
continue until the daily timer setting is cancelled. Cancel the
daily timer when it is not in use.
The "r DAILY" indicator will blinking during timer playback.
Notes:
When performing timer playback using another unit connected to
the USB terminal or AUDIO IN sockets, select "USB" or "AUDIO
IN" in step 8.
This unit will turn on or enter the power stand-by mode
automatically. However, the connected unit to AUDIO IN sockets
will not turn on or off.
To stop the blinking, follow step "Cancelling the timer setting
in the timer stand-by mode" on the right hand side of this page.
28
Checking the timer setting in the timer stand-by mode:
1 Press the CLOCK/TIMER button.
2 Within 10 seconds, press the
or "DAILY", and press the MEMORY button.
3 Within 10 seconds, press the
and press the MEMORY button.
The unit returns to the timer stand-by mode after displaying the
settings in order.
Cancelling the timer setting in the timer stand-by mode:
1 Press the CLOCK/TIMER button.
2 Within 10 seconds, press the
or "DAILY", and press the MEMORY button.
3 Within 10 seconds, press the
and press the MEMORY button.
Timer will be cancelled (the setting will not be cancelled).
Reusing the memorised timer setting:
The timer setting will be memorised once it is entered. To reuse the
same setting, perform the following operations.
1 Turn the power on and press the CLOCK/TIMER button.
2 Within 10 seconds, press the
or "DAILY", and press the MEMORY button.
3 Within 10 seconds, press the
press the MEMORY button.
4 Press the ON/STAND-BY button to enter the power stand-by
mode.
or button to select "ONCE"
or button to select "CALL",
or button to select "ONCE"
or button to select "OFF",
or button to select "ONCE"
or button to select "ON", and