Cd Indicator; Mp3 Indicator; Disc Or Usb Total Indicator; Disc Or Usb Play Indicator - Sharp XL-UH25H Operation Manual

1
Press the ON/STAND-BY button to turn the power on.
2
Open the disc compartment.
3
Place the disc on the spindle, label side up.
Be sure to place 8 cm (3") disc in the middle of the spindle.
4
Close the disc compartment.
Press the CD button on the remote control or FUNCTION
button repeatedly on the main unit to select CD function.

CD Indicator

Total Indicator
[CD]
Total number of
Total playing time
tracks on the disc
of the disc
Due to the structure of the disc information, it takes longer to
read an MP3/WMA disc than a normal CD (approximately 20
to 90 seconds).
5
Press the / (CD / ) button to start playback.
Disc play indicator
Playback will begin from track 1.
After the last track on the disc is played, the unit will stop
automatically.
8 cm (3")
12 cm (5")

MP3 indicator

WMA
indicator
[MP3/WMA]
Total number
of files
To remove the discs:
In the stop mode, open the disc compartment.
To pause playback:
Press the / (CD / ) button.
To stop playback:
Press the (CD ) button.
Caution:
Do not play discs of special shapes (heart, octagon, etc.). It may
cause malfunctions.
If a disc is damaged, dirty, or loaded upside down, "NO DISC" or
"CAN'T RD" will appear on the display.
Keep foreign objects out of the disc compartment.
Subjecting the unit to shock or vibration may cause mistracking.
When the unit is not being used, be sure to close the disc
compartment. If it is left open, the lens may be covered with dust
and the unit may not operate properly.
If TV or radio interference occurs during CD operation, move the
unit away from the TV or radio.
XL-UH25H
15