Timer Play Indicator - Sharp XL-MP2H Operation Manual

10
To select CD, press the CD /
CLOCK/TIMER button.
11
To select TUNER (BAND), press the TUNER (BAND)
button and then press the CLOCK/TIMER button.
12
Select the band by pressing the PRESET (
and then press the CLOCK/TIMER button to set the sta-
tion selected.
OR
13
To select a preset channel number, press the PRESET (
button and then press the
or
14
Press the SLEEP button for more than 2 seconds to
activate timer function.
The "TIMER" indicator lights up and the unit is ready for timer
playback.
15
Press the ON/STAND-BY button to enter the power stand-
by mode.
OR
or ) button
16
When the preset time is reached, playback will start.
17
When the timer end time is reached, the system will enter
the power stand-by mode automatically.
To cancel Timer function:
Press the SLEEP button for 2 seconds. The "TIMER" indicator will
disappear.
Notes:
After selecting the playback source, when press the CLOCK/
TIMER button to confirm, "SOURCE" will appear and blink for 2
seconds, then change to CD or TUNER mode.
When the preset time is reached, playback will start at current
setting if no selected playback source is made.
The volume cannot be preset during timer operation. It will always
go to volume 16.
) button and then press the CLOCK/TIMER button.
XL-MP2H
27