Sharp XL-UH220H Operation Manual page 34

Timer and sleep operation (Remote Control only) (continued)
XL-UH220H
11
When the preset time is reached, playback will start.
The volume will increase gradually until it reaches the preset
volume.
12
When the timer end time is reached, the system will enter
the power stand-by mode automatically.
Once timer:
The timer will be cancelled.
Daily timer:
The timer will operate at the same time every day. It will
continue until the daily timer setting is cancelled. Cancel the
daily timer when it is not in use.
Note:
When performing timer playback using another unit connected to the
USB terminal or AUX IN sockets, select "USB" or "AUX" in step 8.
This unit will turn on or enter the power stand-by mode automatically,
however, the connected unit to AUX IN sockets will not turn on or off.
34
Checking the timer setting in the timer stand-by mode:
1 Press the CLOCK/TIMER button.
2 Within 10 seconds, press the or
or "DAILY", and press the MEMORY button.
3 Within 10 seconds, press the or
CALL" or "DAILY CALL", and press the MEMORY button.
The unit returns to the timer stand-by mode after displaying the
settings in order.
Cancelling the timer setting in the timer stand-by mode:
1 Press the CLOCK/TIMER button.
2 Within 10 seconds, press the or
or "DAILY", and press the MEMORY button.
3 Within 10 seconds, press the or
OFF" or "DAILY OFF", and press the MEMORY button.
Timer will be cancelled (the setting will not be cancelled).
Reusing the memorised timer setting:
The timer setting will be memorised once it is entered. To reuse the
same setting, perform the following operations.
1 Turn the power on and press the CLOCK/TIMER button.
2 Within 10 seconds, press the or
or "DAILY", and press the MEMORY button.
3 Within 10 seconds, press the or
ON" or "DAILY ON", and press the MEMORY button.
4 Press the ON/STAND-BY button to enter the power stand-by
mode.
button to select "ONCE"
button to select "ONCE
button to select "ONCE"
button to select "ONCE
button to select "ONCE"
button to select "ONCE