Mp3/Wma Title Indicators - Sharp XL-UH220H Operation Manual

Procedure to playback MP3/WMA disc
To playback CD-R/RW.
1
Press the CD button, and load a MP3/WMA disc.
After disc is loaded, the disc info will be displayed.
MP3 indicator
WMA indicator
Disc Name
Disc 1 Blinking
In case folder is selected, proceed to step 2.
In case file is selected, proceed to step 4.
2
Press the FOLDER button, and press the TUNING (
button to select desired playback folder. (Folder mode on)
FOLDER indicator
FOLDER number
To start playback with folder mode on, go to step 5.
To change the playback folder, press the TUNING (
select another folder.
3
Select desired file to be played back by pressing the
button. Proceed to step 5.
4
Select desired file to be played back by pressing the
button. (Folder mode off)
5
Press the
Playback will start and file name will be displayed.
Title, Artist & Album name is displayed if it is recorded on the disc.
TOTAL indicator
Display content can be changed by pressing the DISPLAY button.
File Name Display
Total number of files
or )
Function Display
( 2)
Clock Display
Total files in Folder 3
or ) to
In case of playback with the folder mode on, press the TUNING (
or ) button, and the folder can be selected even though it is in
playback/pause mode.
or
It will continue playback/pause mode in the 1st track of the selected
folder.
( 1) MP3 ID3-Tag only support version 1.x.
( 2) Only appears when clock is already set.
Note:
If "NO SUPPORT" is displayed, it means "Copyright protected
WMA file" or "Not supported playback file" is selected.
/ (CD / ) button.
TITLE-1 Indicator
Title Display
( 1)
TITLE-2 Indicator
Artist Display
( 1)
TITLE-3 Indicator
Album Display
XL-UH220H
or
21