Operation - Scytek electronic Astra 50 Installation & Operating Instructions Manual

This option modifies the unit's (-) Negative Armed Starter Disable output operation. When this option is
turned ON, the unit will PASSIVELY activate the Starter Disable 45 seconds after the ignition is turned off.
Starter disable output is deactivated through the remote when unlocking the vehicle or a manual override.
6. IGNITION TRIGGER
This option controls the unit's optional Ignition trigger feature. If selected to ON, then the vehicle's horn
will honk if an unauthorized operator turns on the Ignition after the vehicle had been locked with the
remote. This function is similar to an alarm system. To avoid a trigger, use the remote for BOTH
LOCKING and UNLOCKING the vehicle. If system accidentally triggers, press button #4 to reset.
7. EXTENDED HORN CHIRP
This option allows the unit to provide a slightly longer lock/unlock horn chirp output. This option is ONLY
required on specific vehicles where the normal horn chirp is not long enough to activate the factory horn
and produce a chirp.
OPTION RESET: RESTORES PROGRAMMING OPTIONS TO FACTORY DEFAULT SETTINGS:
1. Turn the Ignition ON, wait one second, and press the Override/Program button 5 times.
2. The system will flash the LED 5 times
3. Press Button #3 (Trunk). Lights will flash 4 times and horn will chirp (if optional horn chirp installed) 4
times. All options will be returned to factory default setting. Default settings are marked with an "*"

OPERATION

REMOTE LOCK
To lock the doors, press the #1 (Lock Symbol) button on the transmitter. Lights will flash once and LED
will begin flashing. You will also hear a single horn chirp (if optional horn chirp feature is installed).
Optional: If starter disable is installed, it will also become active.
REMOTE UNLOCK
To unlock the doors, press the #2 (Unlock Symbol) button on the transmitter. Lights will flash 2 times. You
will hear 2 horn chirps (if horn chirp installed). Optional: Starter disable will turn off.
SEPARATE DRIVER'S DOOR UNLOCK (OPTIONAL)
When using the Optional Separate Driver's & Passenger unlock, also known as "Driver's Priority" or "2
Stage" unlock, press the #2 Unlock button once to unlock the driver's door and a second time to unlock
remaining door as needed. Lights will flash 2 times on the first press and then one more time on the
second press.
To sound the panic alarm in an emergency situation or to draw attention to your vehicle press and hold Button #4
(Panic) for at least 2 seconds. The horn will begin to pulse and parking lights will flash for up 45 seconds or until the
Panic Button on the transmitter is pressed again to reset this mode.
TRUNK / HATCH POP (REMOTE AUX. OUTPUT 1, OPTIONAL)
To pop the trunk (Optional), press Button #3 (Open Trunk Symbol) on the transmitter for at least 2 seconds. There is
a slight delay on this function. This is an intentional delay to help prevent your trunk or hatch from opening
accidentally when the remote is in your pocket or purse.
2nd
AUX. OUTPUT (REMOTE AUX. OUTPUT 2, OPTIONAL)
To activate the Second auxiliary output press and hold Button #1 (Lock) and hold for more than (1) second. This
output can be used to control other optional add-on accessories such as a Remote Engine Start Module.
3RD
AUX. OUTPUT (REMOTE AUX. OUTPUT 3, OPTIONAL)
To activate the Third auxiliary output press and hold Buttons #2 (Unlock) and #4 Panic together. This output can be
used additional accessories.
#3#1#2#4PANICTRUNKPANICLOCKUNLOCKREMOTE
IGNITION TRIGGER (OPTIONAL REQUIRES HORN HONK FEATURE)
This optional feature allows the unit to activate the panic mode if an unauthorized operator turns the Ignition ON
after the vehicle had been locked using the remote control. This is not alarm system that can be triggered when
opening the door, however with this feature is will trigger if the Ignition is turned on if you choose. To avoid an
Ignition trigger, use the remote for BOTH LOCKING and UNLOCKING the vehicle. When the Ignition trigger
occurs, press button #2 (Unlock) on the remote or if you don't have a remote then perform an Emergency Override.
See Below for Emergency Override.
9