Table of Contents
Advertisement
Turn Ignition ON and OFF 3 times quickly, leaving it ON the
2. Lights should flash 3 times & horn will chirp 3 times if horn feature is installed.
3. Push and hold the Program/Override Button for about 5 seconds until you get 3 lights/LED flashes & 3
Horn chirps. Release the button.
4. Press the #1 (LOCK) on transmitter to learn. Lights will flash for code learn confirmation.
5. Repeat step 3 for up to 2 additional transmitters. The system will learn a total of 3 transmitter codes.
6. Turn off Ignition. System will flash lights 3 times and chirp 3 times when exiting programming mode.
To change programmable options, follow steps below. LED Must be installed or plugged into control
module for programming options.
1. Turn the Ignition ON, wait one second, and press the Override/Program button 5 times.
2. The system will flash the LED 5 times
3. Within the next few seconds, press the Override/Program button [again] the number of times that
corresponds to the options chart below. Parking lights and/or optional horn should chirp for each button
press. Don't lose count!
4. When you get to the desired option number, quickly press the appropriate button on the remote control
according to the chart below. The system will provide 1 chirp/flash for Button 1 (Lock Symbol) and 2
chirps/flashes for button 2. (See Option Chart for numbers, descriptions, and values.)
5. Turn Ignition off. Change ONE option at a time repeating these same steps 1-4. When you are finished
customizing options, check operation to see if the option(s) have changed.
PROGRAMMING OPTIONS CHART * = DEFAULT SETTING
Option #
Option Description
1.
Auto Lock & Unlock with Ignition
2.
Double Unlock Pulse
3.
Horn Chirp
4.
Lock/Unlock Pulse Time
5.
Passive Starter Disable
6.
Ignition Trigger
7.
Extended Horn Chirp
1. AUTOLOCK / UNLOCK WITH IGNITION
Controls whether the doors will automatically lock when the ignition is turned on and will unlock when the
ignition is turned off. Note: When Separate Driver's Door Unlock feature is installed, only driver's
door will unlock when IGN. is turned off.
2. DOUBLE UNLOCK PULSE
The unit will send 2 unlock pulses when the #2 Unlock button is pressed. This feature may be required for
interfacing this system into specific makes and models of vehicles that require this function.
3. HORN CHIRP CONFIRMATION
This option turns the horn chirps for lock/unlock on or off.
4. DOOR LOCK/UNLOCK PULSE TIME
Controls the amount of time (0.8 sec. or 3 sec.) for the lock/unlock pulse. The 3 sec. setting may be
required for 1980'/90's European Vehicles that require a long pulse to operate electric vacuum type door
lock systems.
5. PASSIVE STARTER DISABLE OUTPUT (Applies to OPTIONAL starter disable feature)
TRANSMITTER PROGRAMMING
OPTION PROGRAMMING
OPTION PROGRAMMING
Selection
ON or OFF
ON or OFF
ON or OFF
0.8 Sec. or 3 Sec.
ON or OFF
ON or OFF
Normal or
Extended
8
3rd
time. (ON/OFF, ON/OFF, ON)
Lock Button
Unlock Button
ON*
OFF
OFF*
ON
ON*
OFF
0.8 Sec.*
3 Sec.
OFF*
ON
OFF*
ON
Normal*
Extended
Hide quick links:
Advertisement
Table of Contents
