Table of Contents
Advertisement
Installing USB Driver
When the USB driver is installed, the SD Video
Camera will be recognized by the personal computer.
Do not connect the USB cable until the USB driver has
been installed.
1
Insert the supplied CD-ROM into the
personal computer's CD-ROM drive.
≥The launcher for installation is activated
automatically.
2
Click [USB Driver].
3
Click [Finish].
≥After rebooting the computer, the USB driver is
activated.
Installing SD-MovieStage
Ver.2.5
≥Applications which are compatible with older version
of DirectX may not operate properly by installing
DirectX 9.0b.
1
Insert the supplied CD-ROM into the
personal computer's CD-ROM drive.
≥The launcher for the installation is activated
automatically.
2
Click [SD-MovieStage Ver.2.5].
≥When [SD-MovieStage Ver.2.5] screen appears,
click [Next].
3
Read License Agreement carefully, and
click [Yes], if you accept the terms of the
agreement.
4
Select the Video System.
≥Select [NTSC] or [PAL] and click [Next].
5
Complete the installation according to the
message.
≥When the DirectX 9.0b setup screen appears,
install it according to the message. (Failure to
install DirectX 9.0b disables you from using
SD-MovieStage Ver.2.5.) We recommend using
the new version of DirectX. Please refer to
Microsoft's website for details on DirectX.
≥After rebooting the computer, the
SD-MovieStage Ver.2.5 is enabled.
44
2
3
2
3
4
Advertisement
Table of Contents
